Master Lock XR20 Wartungshandbuch PDF herunterladen (Seite 118)

1. Run the MAX application program.

2. In the Configuration window, press the + sign to the left of Devices and Interfaces

to view the installed devices.

3. If there is more than one IEEE-488 (GPIB) device listed, then select the correct

GPIB device.

4. Press Scan for Instruments on the menu bar and wait several seconds.

5. At least one instrument should appear under the GPIB controller. If no instruments

appear, then refer to Section A.1 to verify the correct setup.

6. On the menu bar, press Communicate with Instrument. The NI-488.2

Communicator dialog box should appear.

7. In the NI-488.2 Communicator dialog box, press the Configure EOS button. The

Termination Method dialog box should appear.

a. Select the option Send EOI at end of Write.

b. Enter 0 into th EOS byte.

c. Press OK.

106

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 128 129

Keine Kommentare

Master Lock XR20 Wartungshandbuch Seite 118