Master Lock XR20 Wartungshandbuch PDF herunterladen (Seite 93)

BIT ERROR CODE ERROR TYPE

5 100 through -199 Command

4 200 through -299 Execution

3 300 through -399 Device dependent

2 400 through -499 Query

Table 4.10 ERROR MESSAGES

ERROR ERROR STRING DESCRIPTION

-100 Command error generic command error

-102 Syntax error unrecognized command or data type

-108 Parameter not allowed too many parameters

-222 Data out of range e.g., outside the range of this device

-350 Queue overflow errors lost due to too many errors in queue

-400 Query error generic query error

4.7 Restricted Command Set

Commands and queries described in this Section 4.0 require the power supply to be configured

for remote operation. There are instances when the power supply may be configured for rotary or

external programming and certain SCPI command features may be desirable. As defined in Table

4.11, a reduced set of commands and queries are available to allow this mode of operation.

Table 4.11 REMOTE INTERFACE AVAILABILITY DURING ROTARY AND

EXTERNAL PROGRAMMING

SCPI COMMAND DESCRIPTION PANEL (note 1)

SUBSYSTEM COMMAND/QUERY EXAMPLE

XRC XR

CQCQ

Source VOLT and VOLT:TRIG

VOLT:PROT

CURR and CURR:TRIG

CURR:PROT

PER (not available with XR Series)

Measure MEAS:VOLT?

MEAS:CURR?

System SYST:VERS?

SYST:ERR?

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 128 129

Keine Kommentare

Master Lock XR20 Wartungshandbuch Seite 93